All Products
CHOOSE MANUFACTURERS
Brand: Teco
Model and Size: FHMR47X100R215
Delivery Time: 1 - 2 days
47 x 100mm Masonry Return Hanger R215mm, meticulously designed for a range of applications and installations similar to the standard Masonry Joist Hanger. The innovative return feature offers enhanced lateral support by wrapping around the rear of masonry or timber components. Standard configuration..
Brand: Various
Model and Size: Limestone clean 20mm
Delivery Time: 1 - 2 days
Used for a variety of construction applications including sub bases, pipe bedding, filling.This product will most likely be locally quarried meaning the colour may vary around the UK. This is a construction aggregate, not decorative. If you want a decorative gravel please call us to get the colour a..
Brand: Various
Model and Size: building sand trade pack
Delivery Time: 1 - 2 days
Building Sand Trade Pack contains building sand of a consistent quality and colour. This essential building aggregate is ideal for use in a variety of applications, including bricklaying mortar.
Properties
Actual weight may vary depending on moisture
Multi-purpose
General building and landscap..
Brand: Various
Model and Size: Gravel and Shingle 20mm trade pack
Delivery Time: 1 - 2 days
The trade pack of 20mm gravel and shingle consists of larger stones that can be mixed with sand and cement for concreting. They are ideal to be used for driveways, borders, bedding drainage pipes and paths as well as a number of landscaping tasks.This product will most likely be locally quarried mea..
Brand: Teco
Model and Size: FHMR47X100R150
Delivery Time: 1 - 2 days
47 x 100mm Masonry Return Hanger R150mm is designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. There is a 25mm drop on the return flange as standard but many special..
Brand: Siniat
Model and Size: 25Kg
Delivery Time: 1 - 2 days
The GTEC Direct Bond Lining system is the simplest option for single layer drylining of masonry substrates. It provides a clean flat and easy to finish surface by bonding GTEC Board to the masonry substrate. This construction method reduces drying out time speeding up internal fit out. The system us..
Brand: 4TRADE
Model and Size: 5L
Delivery Time: 1 - 2 days
4Trade Mortar Plasticiser is used to improve the workability and adhesion of mortars without adding lime.Reduces water content of mortarMinimises cracking and crazingTreats up to 58 bags of cementConforms to EN 934-3 standard..
Brand: Various
Model and Size: 2440mm x 1220mm x 11mm
Delivery Time: 1 - 2 days
OSB (otherwise known as Oriented Strand Board) is made using layered pieces of wood in a specific orientation to add strength and durability. The wooden pieces are bonded together using wax and resin making it versatile and strong. OSB board are suitable for use in structural and non-structural uses..
Brand: Siniat
Model and Size: 2400 x 1200 x 15mm
Delivery Time: 1 - 2 days
The GTEC DB Board is a plasterboard with superior acoustic performance suitable for installation with stud partitions, lining systems and ceilings.Features:Can cut out noise up using a single layer of 15mm each side of a partition system30 minutes fire resistance can be achieved with a single layer ..
Brand: Siniat
Model and Size: 2400 x 1200 x 12.5mm
Delivery Time: 1 - 2 days
The GTEC Fire Board is a plasterboard which provides superior fire resistance for stud partitions, wall lining and ceiling systems. Achieve 60 minutes fire resistance from a 12.5mm single layer partition system. It complies with BS1230 type 5 and BS EN 530 types D and F.Features:60 minutes fire resi..
Brand: Siniat
Model and Size: 2400 x 1200 x 15mm
Delivery Time: 1 - 2 days
The GTEC Fire Board is a plasterboard which provides superior fire resistance for stud partitions, wall lining and ceiling systems. Achieve 60 minutes fire resistance from a 15mm single layer partition system. It complies with BS1230 type 5 and BS EN 530 types D and F.Features:60 minutes fire resist..
Brand: Technogips Pro
Model and Size: 2400 x 1200 x 12.5mm
Delivery Time: 1 - 2 days
The standard type A wallboard from Technogips consists of a gypsum core reinforced with special additives, enclosed between special paper. Ideal, for internal application in areas with normal humidity and no specific fire resistance requirements.Features:Lightweight and comfortable to cut and mountC..
Brand: Siniat
Model and Size: 1800 x 900 x 9.5mm
Delivery Time: 1 - 2 days
The GTEC Standard Board is a gypsum board for partitions, linings and ceilings where normal fire, structural and acoustic levels are specified. It is available with square or tapered edges in a variety of sizes. Tapered edge boards for taping and jointing to achieve a flush finish or for a single co..
Brand: Expamet
Model and Size: 16 - 20mm x 3m
Delivery Time: 1 - 2 days
Stainless Steel Angle Bead for use on all rendered corners.Features:For external render work.One size for both thicknesses.Manufactured from 0.4mm thick stainless steel.Suitable for 16mm and 20mm render depths.For external use.Available in 3m lengths...
Brand: Expamet
Model and Size: 65mm x 20m
Delivery Time: 1 - 2 days
Galvanised mesh reinforcement for internal plastering over wall chasesFeatures:Galvanised mesh reinforcement for internal plastering over wall chases.Expanded steel mesh with no joints or interweaving to fail under stress.Manufactured from 0.4mm thick galvanised steel.Available in bundles of 5.Coil ..
Brand: Expamet
Model and Size: 10-13mm x 45mm x 2.4m
Delivery Time: 1 - 2 days
Expamet Internal Standard Angle Bead for traditional wet plaster applications, wing width of 45mmFeatures:Provides a true, straight corner which protects and reinforces plaster where it is most vulnerable.One size adjusts for thickness.Also available as a trade pack - refer to customer services for ..
Brand: Expamet
Model and Size: 10mm x 2.4m
Delivery Time: 1 - 2 days
Expamet Plaster 10mm Stop Bead 2.4m for traditional wet plaster applicationsFeatures:Finishes and reinforces plaster edges.Manufactured from tough pre-galvanised steel, the strength and rigidity for a quality finish is assured by the parallel strand mesh.Suitable for 10mm plaster depths.For internal..
Brand: Various
Model and Size: 3.6m x 2m
Delivery Time: 1 - 2 days
Reinforcing Fabric in different sizes for slab construction.Features:Structurally beneficial giving concrete bond.Easy to lay in small sheets..
Brand: Teco
Model and Size: MMINI - 38x72
Delivery Time: 1 - 2 days
38x72mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced using pre-galvanised milk steel which is 1mm thick with a tag on the base of the hanger to help avoid rotation and aid fast, acc..
Brand: Hanson
Model and Size: 25Kg
Delivery Time: 1 - 2 days
Hanson Castle Hydrated Lime may be used together with Hanson Castle cements to produce traditional cement: lime: sand mixes for mortars and renders. Hydrated lime being non-hydraulic is not suitable for use in mortars without cement being present. The principal benefit derived from hydrated lime in ..
Brand: Hanson
Model and Size: 0.25mm
Delivery Time: 1 - 2 days
Multicem is a high performance cement, designed specially for easy of spreading and water retention. It is ideal for general purpose concrete, mortar, render and screed, and comes in a tough paper bag that is resistant to bursts, splits and tears. It can be stored outdoors short-term and contains ai..
Brand: Isover
Model and Size: 100mm
Delivery Time: 1 - 2 days
The Spacesaver insulation is a glass mineral wool roll for pitched roof joist applications. The strong resilient and flexible rolls are pre-preforated to fit between common joist spacing. The rolls are now supplied 33% longer for speed of installation and are suitable for 'cold roof' applications in..
Brand: Various
Model and Size: 19mm x 38mm
Delivery Time: 1 - 2 days
Treated Sawn Tile Batten is a high quality, responsibly sourced, treated sawn timber suitable for general construction use.Each piece is high pressure treated with Tanalith ‘E’ (or similar) to preserve and protect the timber from combat rot, decay and insect attack. All cut ends are re-sealed with a..
Brand: Various
Model and Size: 50mm x 75mm x 2400mm
Delivery Time: 1 - 2 days
CLS Sawn Timber beam is ideal for use on partitioning and general construction projects. Made from softwood, each piece is planed on four sides and regularised with rounded edges for easy handling. All beams are kiln dried to help improve stability, strength and durability.Imported from Sweden or th..
Brand: Various
Model and Size: 32mm x 115mm
Delivery Time: 1 - 2 days
The easy and cost-effective way to construct a frame for internal doors includes the door stops, can be painted or stained to finish...
Brand: Various
Model and Size: 2440 x 1220 x 12mm
Delivery Time: 1 - 2 days
Moisture Resistant MDF is a commonly used board in areas where there are high humidity levels. Compared to standard MDF, moisture resistant MDF has a special moisture repellent resin that provides a high level of moisture resistance. Moisture Resistant MDF can be used in places such as kitchens, bat..
Brand: Various
Model and Size: 2440 x 1220 x 6mm
Delivery Time: 1 - 2 days
MDF Board (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with an oil, varnish or paint. The dense and lig..
Brand: Various
Model and Size: 2440 x 1220 x 12mm
Delivery Time: 1 - 2 days
Pine Structural Plywood is a highly durable and lightweight material often used in construction due to its useful properties. It does not warp or crack with changes in moisture. Structural plywood is often used in permanent structures where strength is needed, such as flooring, beams, formwork and r..
Brand: Various
Model and Size: 2440 x 1220 x 5.5mm
Delivery Time: 1 - 2 days
Hardwood Plywood is a commonly used product across homes and is manufactured using thin sheets of veneers glued together. The hardwood plywood offers a high quality finish, that is suitable for joinery, furniture and many internal projects. Our range of hardwood plywood offers plenty of strength for..
Brand: Various
Model and Size: 9 x 2440 x 1220mm
Delivery Time: 1 - 2 days
Spruce Plywood is an ideal product for both interior and exterior construction work where strength and durability is required. Spruce plywood is manufactured from long-grained, homogenous Nordic conifer with straight fibres. Spruce Plywood panels are lightweight and easy to work with making them eas..