2.2mm ICOPAL W-PET Plus SBS - Top Covering Roofing Felt - 1m x 15m roll

2.2mm ICOPAL W/PET PLUS SBS top covering felt is made of a special strong polyester non-woven fabric made of continuous polyester fibres (PET), reinforced with glass threads along and across, with very high resistance to nail tearing, and is modified with SBS synthetic rubber. The top side is covered with coarse-grained mineral sprinkles, the bottom side is covered with fine-grained mineral sprinkles or plastic foil. The 80mm wide self-adhesive strip solves the problem of gluing longitudinal overlaps. After removing the protective foil, the sheets are permanently connected and pressed with a pressure roller.

CHARACTERISTICS

• Behave naturally on the roof,
• Does not shrink,
• Works flexibly with the roof substrate,
• Does not fold on a pitched roof,
• Can be laid along the ridge,
• Does not tear during installation,
• Can be nailed along the overlap and glued on the overlaps,
• Resistant to strong gusts of wind,
• Resistant to unfavourable weather conditions,
• Waterproof,
• Glued with asphalt adhesives or mechanically fixed with roofing felt nails, screws, etc.

APPLICATION

• For the construction of new and renovation of old roofs

NOTES

• Roofing felt should not be laid when the roof surface is wet, icy, during precipitation or in strong winds.
• Roofing felt rolls should be protected from moisture and exposure to sunlight or heat sources. 
• Roofing felt rolls should be placed on an even surface in a standing position in one layer.