Atlas Floor Self Levelling Compound SMS 30 - 25kg bag

Atlas SMS 30 is designed to effectively even out substrates within a thickness range of 3-30mm. It is suitable for addressing both localized irregularities and slight slopes across the entire substrate. This makes it an ideal solution for raising the floor level throughout a room, particularly when there is a need to level two adjacent spaces seamlessly. Perfect for use in areas with high humidity, such as domestic bathrooms, ensuring durability and performance in challenging environments. Recommended for levelling the surface of existing cement and anhydrite heating screeds, especially when unevenness hinders the installation of final cladding. A thin layer of Atlas SMS 30 can be applied to create a smooth, even surface. Once cured, it provides a very smooth surface, making it particularly suitable as a finishing layer for thin-layered and PVC panels.

Consumption: Average consumption is 16,5 kg of mortar for 1 m²/10mm layer thickness.

CHARACTERISTICS

• Evens out substrates from 3-30mm.
• Suitable for both localised irregularities and slight slopes across the entire substrate.
• Raises the floor level throughout a room, ideal for levelling adjacent spaces.
• Can be used in high-humidity areas, such as domestic bathrooms.
• Recommended for levelling existing cement and anhydrite heating screeds.
• Provides a very smooth surface, perfect as a finishing layer for thin-layered and PVC panels.
• Rapid-setting formula allows for fast application and quick turnaround.
• A level surface to be achieved even in large rooms, without the need for guide strips or the need to strip the compound with patches.
• Fast-setting - rapid strength build-up allows foot traffic as early as 3 hours after screed application.
• Tiling just after 18 hours.
• Once cured, offers a robust and resilient surface suitable for everyday use.

APPLICATION

• Ensure the surface is clean, dry, and free from any contaminants like grease, oil, or loose particles.
• Prime the surface with a suitable primer recommended by the manufacturer.
• Add the required amount of clean, cold water to the SMS 15 powder.
• Mix thoroughly using a low-speed mixer until you achieve a smooth, lump-free consistency. Avoid over-mixing.
• Pour the mixed SMS 15 onto the prepared surface.
• Use a suitable tool like a notched trowel or a roller to spread the material evenly.
• For larger areas, consider using a pump or a spreading machine.
• The self-levelling properties of SMS 15 will automatically level the surface, ensuring a smooth and even finish.
• Allow the SMS 15 to set according to the manufacturer's instructions.
• Avoid foot traffic or laying floor coverings until the material has fully cured.

Note:

• Ensure adequate ventilation during application and curing.
• Wear appropriate protective gear, such as gloves and goggles.
• Ideal application temperature is between 15°C and 25°C.
• High humidity can affect curing time, so adjust accordingly.
• Always refer to the specific product instructions for detailed guidance and safety information.