Welded Straddle Hanger 75 x 200mm, 100ST
Welded Straddle Hanger 75 x 200mm, 100ST
- Product Code: U1478
- Delivery Time: 3 - 5 days
- Brand: Teco
- Model and Size: WS75x200S100
- Weight: 2.80kg
Welded Straddle Hanger 75 x 200mm, 100ST
75mm x 200mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger consists of two hangers joined together by a plate on the masonry flange. This design enables precise alignment of two joists positioned directly opposite each other on either side of a wall or beam. Crafted from 2.4mm thick Galvanized steel EN 10346 DX51D Z275, the hanger ensures a long-term safe working load of 3.5 kN.
INSTALLATION of 75x200mm Welded Straddle Hanger 100ST
- The back plate of the hanger should rest flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to cure before any load is applied.
- Joist should be square-cut and sit snugly against the back of the hanger - maximum gap allowed is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanized square twist nails or equivalent.
- Use heavy-duty straps for lateral restraint.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Ensure appropriate fixings are used.
- Always use compatible corrosion-resistant fixings; avoid mixing galvanized fixings with stainless steel products.
- Use mortar of correct strength as per British Standard.
Masonry-Straddle-Hangers_data_sheet.pdf
Brand: Teco
Model and Size: WM44x200
Delivery Time: 3 - 5 days
44x200mm Masonry Joist Hanger with Welded Construction
Experience exceptional support for your timber joists embedded in brick or block walls with our top-of-the-line 44mm x 200mm Masonry Joist Hanger. Designed to withstand a minimum crushing strength of 3.5N/mm, this versatile hanger is also suita..
Brand: Teco
Model and Size: FHMST215
Delivery Time: 3 - 5 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock Plate at 90, rotate and t..
Brand: Teco
Model and Size: MFT38/346BA - 38x154
Delivery Time: 1 - 2 days
38mm x 154mm Multifunctional Joist Hanger serves as a Face Fix Joist Hanger, constructed from 2mm thick pre-galvanized mild steel in accordance with the specifications outlined in BS EN 10327:2004 DX51D+Z275. This hanger is meticulously designed to facilitate timber-to-masonry and timber-to-timber f..
Brand: Teco
Model and Size: LL - 50x450
Delivery Time: 1 - 2 days
Woody Long Leg Joist Hanger 50 x 450mm, crafted from sturdy 1.5mm thick pre-galvanized mild steel in accordance with the exacting standards of EN 10346 DX51D+Z275. Boasting a generous 50mm joist bearing, this timber-to-timber joist hanger is designed for applications such as Loft Conversions, where ..
Brand: Teco
Model and Size: WM125x225
Delivery Time: 3 - 5 days
125x225mm Masonry Joist Hanger with Welded Construction
Elevate the support for your timber joists integrated into brick or block walls with our remarkable 125mm x 225mm Masonry Joist Hanger. Engineered to withstand a minimum crushing strength of 3.5N/mm, this versatile hanger is also suitabl..
Brand: Teco
Model and Size: WR63X200R100
Delivery Time: 3 - 5 days
63mm x 200mm Welded Return Joist Hanger R100mm, designed for a range of applications and installation scenarios, similar to the standard Masonry Joist Hanger. The return feature provides enhanced lateral support by wrapping around the rear of masonry or timber elements. Standard configuration includ..