19mm x 38mm Treated Sawn Tile Batten

Kiln Dried Regularised Sawn Treated Timber C16 which has been regularised by planing all round with eased corners for comfortable handling. Our regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesHigh Pressure treated with Tanalith 'E' (or similar)Kiln dried..

MDF Painted Truprofile Chamfered Round Architrave is a MDF Moulding with a superior prime coating needing minimal finishing, saving both time and moneyPropertiesManufactured In The UKFree From Defects Such As Shakes, Knots And ResinsManufactured from Moisture Resistant MDFEasy To Handle LengthsPrime..

General Purpose Plywood is a quality hardwood plywood suitable for a variety of applicationsPropertiesIdeal for joinery and general useHardwood panel throughoutProduct must be treated with an appropriate wood treatment/sealant before external use..

Marine Plywood is a high quality panel, which performs well under conditions where moisture is a concernPropertiesUsed for general joineryCan be painted and stainedQ Mark VerifiedHigh quality core veneerFace veneer is 1mm thick after sandingMade in accordance with BS1088Not recommended for building ..

Redwood Shiplap Cladding is a quality shiplap board ideal for interior or exterior claddingResponsibly Sources RedwoodOther Patterns And Sizes AvailableAlso Available Low Pressure Preservative TreatedAlso Available PrimedDimensions Will Be Typically 5 To 6mm Less On The Thickness And 5 To 8mm On Wid..

Setcrete™ Latex is a floor levelling compound for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared.An eas..