Hardened wood screws with a countersunk head 5 x 80 with partial thread (200 pcs)
Hardened wood screws with a countersunk head 5 x 80 with partial thread (200 pcs)
- Product Code: U2788
- Delivery Time: 1 - 2 days
- Model: 8x50
Hardened wood screws with a countersunk head 5 x 80 with partial thread (200 pcs)
Hardened countersunk screw with incomplete thread and PZ socket, yellow zinc colour, for joining wooden and wood-based elements, OSB , MDF , plywood, etc.
Model: 120mm x 10m roll
Delivery Time: 1 - 2 days
Jurga TAPEMIX Sealing Tape - 10m rollTwo-layer waterproof and flexible sealing tape for places particularly exposed to moisture, such as corners, wall-to-wall and wall-to-floor joints. It can be used inside and outside the building. Compatible with products from the Folmix and Izomass 2k series.- Se..
£26.90
£32.28 inc VAT
Model: 5x90
Delivery Time: 1 - 2 days
Hardened countersunk screw with incomplete thread and PZ socket, yellow zinc colour, for joining wooden and wood-based elements, OSB , MDF , plywood, etc...
Model: Paving Sand 25kg
Delivery Time: 1 - 2 days
Tarmac's Kiln Dried Paving Sand Is Used As Infill Between Block Paving Or Paving Slabs. It Is A Clean And Fine Dry Aggregate Sand For Brushing Into Joints Of Paving To Help Prevent Movement Whilst Allowing Drainage.Suitable For Use On Block Paving Drives And PathsAid Moisture Retention In SoilResist..
Model: Claymaster 75mm
Delivery Time: 2 - 3 Days
75mm Claymaster is an EPS compressible-fill material which can be used to prevent potential problems in foundations due to moisture movement in soils which contain a large proportion of mineral particles below 0.002mm (clay heave). The material can be used as permanent shuttering for cast in-situ re..
Guide Price: £32.78
£39.34 inc VAT
Model: 2400x1200x12.5mm
Delivery Time: 1 - 2 days
Guide Price: £49.00
£58.80 inc VAT
Model: IN-160h25
Delivery Time: 1 - 2 days More options available
Composite decking board SEQO Intensive model IN-160H25:SEQO Intensive composite boards IN-160H25 model are composite boards of the 1st generation (a process called extrusion). This means that they are uniform throughout the cross-section, colored throughout, and the content of high-quality wood ..
