Menu
Menu
Your Cart
Ceresit Ewi Systems
4eco
Quality Metal Roofing
Torch-on Roofing Felt

Claymaster 75mm

Claymaster 75mm
Claymaster 75mm
Guide Price: £32.78 (£39.34 inc VAT)
Price per m2: £11.38/m2 (£13.66 inc VAT)
  • Product Code: U3357
  • Delivery Time: 2 - 3 Days
  • Model and Size: Claymaster 75mm

Claymaster 75mm

Length: 2400mm
Width: 1200mm
Thickness: 75mm

75mm Claymaster is an EPS compressible-fill material which can be used to prevent potential problems in foundations due to moisture movement in soils which contain a large proportion of mineral particles below 0.002mm (clay heave). The material can be used as permanent shuttering for cast in-situ reinforced concrete, reducing pressure on ground beams in piled foundations, and on the sides of trench fills.

Shrinkable clays are soils containing a large proportion of mineral particles of less than 0.002mm in diameter. This produces an extremely cohesive soil type when wet, but shrinks to a crumbly, crazed structure when dry. The expansion and contraction process during wet and dry periods is known as clay heave. This can cause severe problems with foundations.

Claymaster is a special low-density expanded polystyrene coloured in pink for ease of identification and is available to order in additional widths.

USE

  • below concrete ground beams of a maximum depth of 600 mm
  • in piled foundation construction
  • at the vertical face of deep trench foundations
  • to reduce the pressure exerted on the concrete by expansion of clay soils (clay heave) during the life of the structure.

PROPERTIES

  • Claymaster provides a rapid, cost-effective solution to clay-heave problems, and no specialized trades or equipment are required
  • With a normal ground-beam depth up to 600mm, the initial compression of the material during casting can be disregarded
  • Claymaster is rot-proof and durable and will withstand the conditions encountered below ground. It will not degrade in the presence of high levels of ground water or precipitation
  • Boards are normally rectangular and of uniform thickness, but special shapes are available to order including circular sections to fit around pile caps, and tapered boards
  • The NHBC Standards, Chapter 4.2, building near trees, states that low-density compressible polystyrene is a suitable proprietary material to alleviate ground pressures on foundations in shrinkable soils

CERTIFICATION

Claymaster has been assessed by the British Board of Agrment according to Regulation A2, and found to reduce the effects of the expansion of clay soils which might impair the stability of a building. It has been approved for use under ground beams and against the sides of deep-trench fill foundations; Certificate number 90/2543.

Model and Size: Class 3
Delivery Time: 1 - 2 days
Add to Quote Compare this Product
Model and Size: Paving Sand 25kg
Delivery Time: 1 - 2 days
Tarmac's Kiln Dried Paving Sand Is Used As Infill Between Block Paving Or Paving Slabs. It Is A Clean And Fine Dry Aggregate Sand For Brushing Into Joints Of Paving To Help Prevent Movement Whilst Allowing Drainage.Suitable For Use On Block Paving Drives And PathsAid Moisture Retention In SoilResist..
Add to Quote Compare this Product
Model and Size: 2kg
Delivery Time: 1 - 2 days
A solvent-free two-part epoxy mortar for quick and durable repairs on a wide range of substratesUse for bonding a wide range of substrates including new or old concrete, masonry, bricks, steel or other similar materials to give a hard, durable surfaceExcellent adhesion and strengthSuitable for inter..
Add to Quote Compare this Product
Model and Size: 20kg
Delivery Time: 1 - 2 days
DOLINA NIDY OMEGA Gypsum Plaster Coat, 20 kg, – for plastering walls and ceilings – for manual or machine application – recommended for smoothing even mineral surfaces, in particular gypsum substrates (plasters, gypsum boards) and for concrete substrates as well as cement and cement-lime plasters –..
£15.50
£18.60 inc VAT
Add to Cart
Model and Size: 390
Delivery Time: TBC
Suits both contemporary and traditional build projects.Dimensional tolerance - T2Dimensional range - R1, Soluble salts - S2Frost resistance/durability - F1Water absorption - 23%Manufactured to BS EN 771-1Can be recycled at the end of their useHigh quality facing brickF1 bricks are good for general p..
Add to Quote Compare this Product
Model and Size: Joint tape 48mm - 90m
Delivery Time: 1 - 2 days
PRODUCT OVERVIEW FibaTape Veneer Plaster Joint Tape is a fiberglass mesh tape designed specifically for use with blue plasterboard. The Veneer tape is wider than standard mesh drywall tape and works with a variety of custom plaster finishes from ultra-smooth to custom textures. BENEFITS- Ideal for..
Add to Quote Compare this Product