Ceresit ZU (Base Coat Render) Insulation and Mesh Adhesive 25kg - 48 bag pallet
Ceresit ZU (Base Coat Render) Insulation and Mesh Adhesive 25kg - 48 bag pallet
- Product Code: U3390
- Delivery Time: 1 - 2 days
- Brand: Ceresit
- Model: ZU-25kg-48bags
Ceresit ZU (Base Coat Render) Insulation and Mesh Adhesive 25kg - 48 bag pallet
Ceresit ZU Insulation and Mesh Adhesive is a cement-based, polymer-modified adhesive specifically designed for fixing white or graphite expanded polystyrene (EPS) insulation boards to exterior walls. The EPS boards should meet the requirements of external thermal insulation composite systems (ETICS) according to British Standard EN 13163. Ceresit ZU provides an excellent bond between the insulation and the substrate, whether that is concrete, brickwork, or existing renders. It is also used to embed the reinforcing mesh layer over the insulation, creating a base coat render system. The adhesive is flexible enough to accommodate minor movements in the substrate.
CHARACTERISTICS
- Cement-based, polymer-modified adhesive
- Designed for fixing white or graphite expanded polystyrene (EPS) insulation boards
- EPS boards should meet requirements of EN 13163 for ETICS
- Provides excellent bond strength between insulation and substrate
- Suitable for concrete, brickwork, and existing render substrates
- Used to embed reinforcing mesh, creating a base coat render system
- Flexible to accommodate minor substrate movements
- Easy to apply
APPLICATIONS
- External walls
Application and installation of an external wall insulation system
Fixing polystyrene boards.
- Adhesive should be applied with a trowel around the perimeter of the board - band of 3-4cm wide and several blobs in the centre.
- Place the board to the wall and press it down with a long float. Properly applied mortar after pressing the board to the wall should cover min. 40% of its area.
- The boards should be fixed closely to each other in one plane, with the horizontal joints in different levels.
Installing the reinforced mesh.
- Add the adhesive with a 10 or 12 mm notched trowel on the surface polystyrene boards.
- Press the mesh on the fresh mortar until it is no longer visible.
- Thin coat render can be made after approx. 24 hours from the application of the reinforcement layer.
BBA Certificate Ceresit Ceretherm Classic EPS External Wall Insulation System.pdf
Brand: Ceresit
Model: CT88
Delivery Time: In stock, 1-2 days
Ceresit CT88 Express Application:- Filling gaps between EPS and XPS polystyrene boards- Filling cavities - damage to EPS and XPS boards in the layerinsulating insulation system.
- Adhesive replenishment in the existing insulationProperties:- ideal for filling loses and gaps in the insulation l..
£12.95
£15.54 inc VAT
Brand: Ceresit
Model: CT327
Delivery Time: 1 - 2 weeks
CharacteristicsAlkali-resistant,
Slip proof,
Tear proof,
High impact resistance.
ApplicationEmbed the glass-fibre mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface.Embed the webbing into the upper third of the reinforcing la..
Brand: Ceresit
Model: Ceresit CS38
Delivery Time: 1 - 2 days
Ceresit CS38 High Temperature Resistant Sealant is a one-component, high-temperature sealant resistant to direct contact with fire and temperature fluctuations up to +1200 °C, and even up to +1500 °C for a short time. It has very good adhesion to a wide range of surfaces including: concrete, cement ..
Brand: Ceresit
Model: 1000x500mm - 15m2
Delivery Time: In stock, 1-2 days
PropertiesLightweightEasily cut by knife to any size and shapeHighly resistant to mould growthHighly durableCost effectiveEnvironmentally friendlyUsesNew and existing rendered or unrendered masonryTimber backed walls, roofs, and floorsCavity wall Layered external wallsPlaces likely to develop t..
£36.95
£44.34 inc VAT
Brand: Ceresit
Model: HALF PACK 20mm White
Delivery Time: 1 - 2 days
Ceresit White Polystyrene EPS board is a polystyrene board for use in conjunction with any render systemUsesSolid brick and block wallsCavity brick and block wallsBalconies and loggiasRoofs and between raftersRims, lintels and revealsCeilings in garages and basementsWalls with a frame structure..
£21.50
£25.80 inc VAT
Brand: Ceresit
Model: 1000x500mm - 10m2
Delivery Time: In stock, 1-2 days
Ceresit Graphite Polystyrene EPS board is a polystyrene board that has had graphite added which considerably increases insulation performance.UsesBalcony loggias
Sandwich walls
Framed wall surfaces
Continuous outer layers of frame walls
Cavity block and brick walls
Gaps in closed or ventil..
£41.50
£49.80 inc VAT