Ceresit CS28 Thermo Resistant Silicon Sealant 280ml
Ceresit CS28 Thermo Resistant Silicon Sealant 280ml
- Product Code: U3361
- Delivery Time: 1 - 2 days
- Brand: Ceresit
- Model: Ceresit CS28
Ceresit CS28 Thermo Resistant Silicon Sealant 280ml
Volume: 280ml
Ceresit CS28 Thermo Resistant Silicon Sealant is a heat-resistant sealant which is one-component elastic sealant that is stable and elastic in the temperature range from -65°C to +260°C, short-term up to a temperature of +315°C. The product exhibits good adhesion to most materials including clean metal, glass, most non-oily woods, silicone resin, hardened silicone rubber, ceramics, natural and synthetic fibres and many painted and plastic surfaces.
FEATURES
- Good adhesion to most non-absorbent materials
- Specific odor during vulcanization
- Resistant to ozone, ultraviolet radiation and temperature extremes
- High temperature resistance (up to +315°C)
- After curing, the product remains permanently elastic
Brand: Ceresit
Model: Ceresit CT100
Delivery Time: 5 - 7 days More options available
CharacteristicsHighly flexible,
Easy to mix, apply and spread,
Fibre-reinforced,
Resistant to extreme mechanical loads and thermal stresses,
Resistant to climatic conditions,
Highly hydrophobic,
Cracks bridging up to 2mm,
Eliminates the need of a primer before plaster application,
Possibilit..
Brand: Ceresit
Model: Ceresit CS38
Delivery Time: 1 - 2 days
Ceresit CS38 High Temperature Resistant Sealant is a one-component, high-temperature sealant resistant to direct contact with fire and temperature fluctuations up to +1200 °C, and even up to +1500 °C for a short time. It has very good adhesion to a wide range of surfaces including: concrete, cement ..
Brand: Ceresit
Model: CT137
Delivery Time: In stock, 1-2 days
Ceresit CT137 Mineral Render is used for making thin layer plasters on concrete substrates, traditional plasters, gypsum substrates and gypsum cardboards, gypsum fi bre boards, etc.We recommend the application of the plaster CT137 as façade plaster within Ceresit Ceretherm ETICS (External Thermal In..
£32.50
£39.00 inc VAT
Brand: Ceresit
Model: 1000x500mm - 2.5m2
Delivery Time: In stock, 1-2 days
Ceresit Graphite Polystyrene EPS board is a polystyrene board that has had graphite added which considerably increases insulation performance.UsesBalcony loggias
Sandwich walls
Framed wall surfaces
Continuous outer layers of frame walls
Cavity block and brick walls
Gaps in closed or ventil..
£37.95
£45.54 inc VAT
Brand: Ceresit
Model: CR65
Delivery Time: 1 - 2 days
Ceresit CR65 Cementitious Waterproofing Slurry is a Rigid Slurry that can be used on the horizontal and vertical surfaces of buildings, structural components, tanks and swimming pools with a water depth of ≤ 10 m. Suitable for the subsequent waterproofing of old buildings or components on the negati..
£29.98
£35.98 inc VAT
Brand: Ceresit
Model: 1.1m x 50m - 55m2
Delivery Time: In stock, 1-2 days
CharacteristicsAlkali-resistant,
Slip proof,
Tear proof
ApplicationThe ready prepared mortar should be spread evenly over the surface of the boards with a tooth trowel with 10-12 mm teeth. In the case of mineral wool boards prior to distribution must also be primed with mortar. In the prepared la..
£67.00
£80.40 inc VAT