9mm Magply Render Carrier Board - 2400mm x 1200mm

9mm Magply Render Carrier Board is a a high strength, breathable non-combustible board manufactured from MgSO4 and reinforcement meshes used for direct rendering, and has been tested with a variety of render systems by the British Board of Agrement.

• Highly economical,
• Easy to install and versatile - can be screwed, stapled, nailed or bonded,
• Suitable for timber and steel frame systems,
• Non combustible,
• Impact, vermin and rot resistant,
• Great dimensional stability,
• High strength,
• Impact-resistant,
  
• Resistant to moisture and mould.
  

• Ensure the board is free from all debris and dry before applying render,
• Minimum 25mm batten fixed at maximum 600mm centres.
• Fixings set at 300mm centres, 
• Always screw boards at least 15mm in from the edge of the board,
• Minimum 25mm continuous cavity behind the board top to bottom finishing 150mm from ground level and 5mm from top soffit,
• Boards should be mechanically fixed minimum 38mm for 9mm and 42mm for 12mm,
• Always render on the course side of the board,
• A layer of DPC is recommended on the face of the batten behind the board,
  
• Air flow should be specific around windows and doors.